raspberry pi

Pairing BBC Microbit with a Raspberry Pi

For a while I have wanted to experiment with sensor events and I recently had a day off so (rather than continuing my re-exploration of the wonderful LOTR trilogy… the book, not the movie) I decided to finally get all the electronics out and give it a whirl.

I have a lot of microbits in the house from running coding clubs so I figured I would use one as a sensor. I also had a Pi Zero that I hadn’t really used so thought I would use it as the machine to which I send the sensor data.

So this is part one of what will be a series where we can explore the possibilities. For this demo, I am going to go over how I got set up getting the microbit to communicate with the Raspberry Pi.

Best friends forever… paired in perfect harmony

It took a lot longer than I thought :/ I had a few issues along the way (many due to my own errors :p). One thing I noticed is that my microbit was a bit sensitive and kept disconnecting from the power source every few minutes, I tried with another which seemed much more stable.


In order to run this tutorial, you will need the following:

  • A microbit
  • A Raspberry Pi (I used the Pi Zero) with the following installed:
    • Bluezero – I used the latest install 3.0 (I originally had 2.0 but had issues getting this working so reinstalled to the newest at the time of writing this).
      • sudo pip3 install bluezero

Prepare the microbit

Here is a link to the microbit code I used. I started with a set up from one of the issues I found in the python-bluezero github repo. However, I found that with that setup, though the code ran, the microbit kept throwing a 020 error, which seems to relate to memory issues. I thus removed the while loop and now it works without the error.

Let’s go over what it does:

  1. On start it will look for the temperature and uart services. It will also show the bluetooth symbol in the LED matrix.
  2. When the microbit is connected to the Pi it will set the connected variable to "true". It will show a smiley face on the LED matrix 🙂 It will also set uart to read up to the hashtag symbol. The bluetooth UART service is started and it can read data received from the Pi. It will terminate reading when it gets to the ‘#’ symbol. More information about this service can be found here. It will display the data as a string on the microbit led matrix.
  3. When the microbit is disconnected from the Pi it will set the connected variable to "false". It will show a sad face 😦

Download the hex file and load it onto the microbit by dragging it into the microbit drive.

Connect to the Pi

Ensure your Raspberry Pi is connected to a power source and that you know the ip address.

ssh <username>@<ipadress>

Enter the username and password set for your Rasberry Pi.

Pairing the Raspberry Pi with the Microbit

Enter the bluetoothctl by typing bluetoothctl. First we will scan to see which bluetooth devices are available.

  1. Find the microbit

First, your Raspberry Pi needs to find the microbit. To do this run the following command:

scan on

This will start scanning for any bluetooth devices and you will see them appear. The microbit one will look something like:

[NEW] Device A1:B2:C3:D4:E5:FF BBC micro:bit [a name]

Once it appears, type scan off to stop the scanning.

2. Pair with the microbit

To pair the microbit and the Raspberry Pi, you can run

pair <device_address>

So in the example above it would be:

pair A1:B2:C3:D4:E5:FF

When you run this pair command, hold down the A+B buttons on the microbit and press the reset button on the back. You will see a bluetooth symbol, then you can release them.

At first this did not work for me but I changed the pairing settings in MakeCode project settings (as mentioned above) and then it worked.

You can check if it is paired by making sure it is listed when you run the following command:


Clone the bluezero repo

This tutorial uses VS Code to build our Python code. Sadly, it is currently not possible to have VS code full supprt with the Raspberry Pi Zero. More details can be found in this github issue.

Instead, you can use SSH FS extension for VS code. It won’t give you any debugging functionality but you can navigate the folders of your Pi and, make new files, code etc. Then add the Raspberry Pi to the ssh file extension by creating a new ssh configuration.

I started out by cloning the python-bluezero repo and using this file as the start point. I’ve pretty much kept it the same for now so I can run over what is happening.

Additionally, I added the ability to get the temperature from the microbit’s inbuilt temperature sensor. This is going to form some basis for our sensor data for this project.

Through doing this, I found out the temperature sensor data is very boring :p so I am planning on swapping it out next time for accelerometer data instead.

Using the microbit_uart.py code as a base

The first thing the Python script does is import microbit tools from the bluezero package. It imports microbit and async_tools.

The code then calls the microbit function and sets up some variable values, which are explained below:

  • adapter address: bluetooth controller on raspberry pi. You can find this by running list controller from the bluetoothctl.
  • device address: microbit address. You can find this by running paired-devices from the bluetoothctl.
  • It then defines which services are enabled and disabled. E.g
    • temperature_service=True because we will be using this to send temperature from the microbit to the Raspberry Pi.
    • uart_service=True because the example script we are using has a need for the uart service.
    • You can also enable others. You will also need to add these into your microbit code by dragging in the relevant blocks (E.g bluetooth led service if you wanted to use the led display as an event input or bluetooth accelerometer service if you wanted to look at rotation of the microbit as an event)

There are two functions already defined; ping and goodbye.

The ping function will transmit a message to the microbit from the Raspberry Pi. The microbit will reads the message up until the hashtag (as defined in our microbit code). The message is “ping”. The microbit will display this message via the leds.

def ping():     
ubit.uart = 'ping#'
return True

This works through UART (Universal Asynchronous Receiver/Transmitter) over bluetooth. It is used for communication across serial ports that is (as the name suggests) asynchronous. The code that makes this all work is here.

The goodbye function disconnects the microbit from the Raspberry Pi and quits the asynchronous event loop. The EventLoop class is defined here.

We are now going to need to add an additional function and some extra lines of code so we can get the temperature reading from the microbit.

Getting temperature data from the microbit

To enable getting a temperature reading from the microbit, first ensure the temperature service is set to true for the microbit:


Then add the following function within the code:

def temperature():
print('Temperature:', ubit.temperature)

Then add the following:

for i in range(3):
eloop.add_timer(i*10000, temperature)

Finally, we need to change the event loop time input where we call the goodbye function to 50000 microseconds (by which time all of the other functions have run).

The code should now look like this:

Next time, we will change this code to remove the uart functionality and add in the ability for us to get data from the accelerometer service as a stream of data that we can use to do some cool stuff with!